Universal Remote Control OCE-0085A, Руководство пользователя

Страница: 27 / 52

Page 27
Channel Control
“
Punch Through
”
This
“
punch through
”
enables you to program
the WR7 so that either the Cable or TV
Channel Controls (CHANNEL UP, DOWN,
LAST, CHANNEL NUMBERS 0-9, +10 and
ENTER) will also operate in other component
modes on the remote control.
STEP 1:
Press and hold the component but-
ton you want to add channel control to, such as
[DVD] or [VCR], and the SELECT [SEL] button at
the same time for two seconds until the
Component LED light turns on.
IMPORTANT: You have 30 seconds to per-
form the next step while you are in program-
ming mode. If you do not press a button within
30 seconds, the component LED light will turn
off. The remote will exit the programming mode
and you will have to start over.
STEP 2: Press the CHANNEL UP [CH ]
button. The component LED light will blink once.
STEP 3: Press either the [TV] or [CABLE/SAT]
button that you want to use as the source of
channel control. The component LED will blink
three times to confirm it is saved.
COMPONENT
BUTTONS
CHANNEL
UP
SELECT