Fast On-Board Programming
Automation Using Macros and Favorites
The powerful memory of the MX-600 offers up to
15 potential Macro buttons and an additional 50
Favorite Channel buttons. Each of these macros can
play back a sequence of programmed commands
that completely automates a complex system with
one button press. A Macro button can record and
play back up to 20 steps, while a Favorite Channel
button can play back up to 10 steps.
Replaces Ten Remote Controls
The MX-600 controls up to 10 components. Each of
the 10 components can be programmed with up to 2
pages of LCD screens plus the 33 hard buttons. The
MX-600 allows you to edit the text on each LCD
screen exactly as you prefer (up to 26 screens with
260 text buttons are available). Whether you prefer
single screen simplicity or total replacement of the
original remotes, the MX-600 will exceed your expectations.
Comprehensive Compatibility with Components
The MX-600’s internal database contains hundreds of “code
sets” of various brands, including hard to find and specific
discrete codes that allow for precise control of all system
components.The MX-600 also has the ability to learn up to 530
new commands.
Memory Back-Up
The MX-600 system features a smart flash memory back-up
system that will retain the programmed memory for up to ten
years, even with dead batteries.
One Hand Ergonomics – Easier to Use
than Original Component Remotes!
The optimized layout enables you to naturally reach
both the thumbpad and hard buttons to navigate
on-screen menus and the critical Transport, Channel
and Volume controls. You’ll quickly discover that you
prefer using the MX-600 to control all the special
features of your system (especially personal video
recorders, satellite receivers, DVD players, surround
sound receivers and digital cable boxes). There will
never be a reason to dig out the old remotes again.
Simplicity Via the RF Base Station
No More Pointing - Radio Waves Penetrate Walls,
Doors and Floors
The MRF-100 receives the RF signals of the MX-600
remote control from any direction.You no longer need
to point the remote control at any of your A/V
components. You can also place the components distracting
blinking lights and displays behind closed cabinet doors and/or
in another room!
© 2003 Universal Remote Control, Inc. Home Theater Master is a registered
trademark of Universal Remote Control, Inc. Entertainment Made Simple is a
trademark of Universal Remote Control, Inc.
The Ultimate In Control Simplicity!
Specifications
MX-600 Remote Control
RF Frequency: 418MHz
RF Range: 50 to 100 feet, depending upon the environment (the
structure of your house, the amount of interference etc.)
IR (Line of Sight) Range: 50-60 feet depending upon components
Weight: 8 oz. (with batteries)
Memory Capacity: 15 Macro Buttons of 20 Steps, 50 Favorite Channel
Macro Buttons of 10 Steps and up to 530 IR Commands with up to 26
Custom Labeled Screens.
Size: 9.0" x 3.0" x 1.3"
Batteries: Four AAA Alkaline batteries included
LCD Size: 1.4" x 2.1"
Warranty: One year Parts and Labor
MRF-100 Radio Frequency Base Station
Power Supply: 9V 300mA/110V 60Hz (included)
IR Flasher Line Outputs: 2.5mm Mono Mini Jack
RF Frequency: 418MHz
Size: 5 1/8" x 3.5" x 1.25" (4.5" antenna up)
Mounting Bracket and Six Emitter/Flashers included
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
MX-600/MRF-100
IR/RF Learning Remote
www.hometheatermaster.com
3. Self-adhesive “Flashers” affix to
the Infrared sensors on the front
panels of your components. The
Flashers relay commands to
components out of sight of the
MRF-100’s Front Blaster. The
Flashers plug in to the MRF-100’s
rear flasher line outputs via their
10 foot cables.
1. The MX-600 remote control sends radio waves in every
direction, so you don’t have to point the remote anymore.
2. The MRF-100’s built-in Front Blaster
sends commands to components in the
same cabinet space as the MRF-100.
