Universal Remote Control Complete Control MX-810I, Руководство пользователя

Страница: 5 / 14

MX-810i O
WNERS
M
ANUAL
MX-810i O
WNERS
M
ANUAL
Page 3 Page 4
Installing and Charging the Battery
Open the battery cover by pressing
on the release clip and removing
the cover.
Note that the three contacts on the
battery must connect to the three
spring-loaded contacts in the MX-
810i. Angle the battery into the bat-
tery compartment, contacts first,
then gently fit the rear of the battery
into the compartment as well.
Replace the battery cover by insert-
ing the hinged end in first, then
snapping the cover back into place.
You can charge the Lithium Ion bat-
tery by simply plugging the includ-
ed charger into the base of the
remote as shown here.
The MX-810i can be used while
charging.
Programming the MX-810i
The MX-810i is programmed via a Windows PC equipped with a USB port
(programming cable included), using our proprietary software, MX-810i
Setup. You can download this software from our website:
www.universalremote.com
Basic setup takes only a few minutes with this software. However, to fully
automate an audio/video system the programmer must have a detailed
knowledge of each component and how the system is connected and
operated. We highly recommend that you use a professional audio/video
installer to program your MX-810i so you will be able to enjoy all the
benefits of the MX-810i as well as one touch operation via Activities.
If you do opt to do some programming on your own, fill out the NOTES at
the end of this manual before beginning. This will greatly speed the
process of programming.