Page 17
MRX-1 B
ASE
S
TATION
Select Network or RF (for optional RFX-250) from the three
options shown for EACH of the identical TVs. You may leave the
other components with no flashers set to IR.
3. Select a Receiver to Control Identical Devices
Choose a Base station to send commands over the Network or via
RF to control multiple components.
4. Adjust the IR Outputs For Each of the Identical Devices
The RF Setup window enables you to adjust which Flashers output
by the remote control for each device individually, by clicking on
the intersection of a row and a column and then selecting Ports 1-6
from the seven options shown in the pull down list box.
Select the correct IR Output (refer to your connection notes) for
EACH of the identical TVs. You may leave the other components of
the system set to ALL. In the figure below, each device is set to a
specific flasher.
5. Close the RF window and Download to the Remote.
