Programming AVEX R6 using
Pre-Programmed Codes
There are three ways you can program your AVEX
R6 using the component brand codes that are pre-
programmed into the remote.
• Quick Set-Up Method
• Three-Digit Code Entry Method
• Auto-Search Method
The Quick Set-Up Method is a unique new feature
that enables the fastest and easiest set-up by using
one-digit codes for up to 10 major brands for each
component. The Three-Digit Code Entry Method
allows you to set-up the AVEX R6 using 3-digit codes
for component brand names. It is also a fast and
easy way to program the remote. The Auto-Search
Method scans through all the brands in the remote
control, one at a time. It should be used when either
the Quick Set-Up or Three-Digit Code Entry Methods
do not work.
* * *
Quick Set-Up Method
STEP 1:
Manually or using your old remote, turn
on the component you want to program—for example,
to program your TV, turn on your TV set.
STEP 2:
Point the AVEX R6 toward the component
that you want to program (in this case the TV set) and
press and hold the component button (in this case the
TV button).
While holding down the component
button,
begin to press numeric keys, one number at
a time, starting from 1, continuing to 2, 3 ... 0 until
component (in this case the TV) turns off.
STEP 3:
Release the component button to save the
code. The component LED light will blink three times
to confirm that the code has been stored.
Repeat the above three steps for other components.
Page 9
COMPONENT
BUTTONS
NUMBER
PAD
AV-EXpertManual.qxd 7/12/07 6:41 PM Page 9
