Universal Remote Control Automator URC-200, Руководство пользователя

Страница: 15 / 56

13
U R C - 2 0 0
Volume Control Punch Through
In most home entertainment systems, the sound
volume is only controlled by one device. In some
systems, it is the TV speakers that make the sound, so
you would use the TV device on the Automator to raise
and lower the volume. In another system, it might be a
surround sound receiver and speakers that control the
sound, so you would use the Automator’s AUDIO
device to adjust the volume. Constantly switching the
Automator to TV or AUDIO to adjust the volume is
inconvenient in daily life.
You can use Punch Through to set the Automator’s
volume buttons to always control the sound in your
system. That way when the Automator is set to VCR or
DVD, the volume up, down and mute buttons will
work perfectly without switching back to AUDIO or
TV. Here’s how:
Enter Setup mode by pressing and holding both
MAIN and ENT for three seconds. The top of the
display shows that you are in SETUP mode now.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
Press the PAGE UP button to get to page 2 of the
SETUP menu. Press the PUNCH button.
Press the VOL button. The display confirms by
displaying “VOL” at the top of the screen. This sets
up the group of three buttons (Volume Up, Volume
Down and Mute) in one action!
1
3
2
Select
Volume