![Universal Innovations Sahara X450 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/universal-innovations/sahara-x450/sahara-x450_manual_1058506017.webp)
BEFORE USING YOUR BARBECUE
Leak Testing
• IMPORTANT – PERFORM LEAK TEST BEFORE USE
• NEVER use an open flame to test for leaks at anytime, DO NOT IGNITE The BARBECUE DURING THE
LEAK TESTING.
• To be performed in a well ventilated area.
• Confirm all the control knobs are in the off position.
• Check for leaks by brushing a solution of 1/2 water and 1/2 soap over all the gas system joints, including
all valve connections, hose connections and regulator connections.
• Ensure soap solution has been applied to all connections – connect the regulator to the gas cylinder,
open the gas control valve on the regulator allowing gas to flow.
• OBSERVE – if bubbles form over any part of the joints there is a leak.
• Turn off the gas and tighten all joints
• Repeat test. If bubbles form again, do not use the barbecue. Please contact your local dealer for
assistance.
• Leak test annually and whenever the gas bottle is removed or replaced.
Gas and Regulator
• This barbecue can use either propane or butane LPG bottled gas.
• Propane bottles, will supply gas all year round, even on cold winter days.
• Butane bottles, will supply sufficient gas in summer. Butane gas must not be used in colder temperatures.
Contact your local gas supplier for advice.
• The bottle should be positioned underneath the main barbecue body.
• Gas bottles should never be stored or laid on their side.
• Never store gas bottles indoors.
• This barbecue is intended for use with LPG bottled gas only. (A regulator of 28mbar must be used for
Butane gas or 37mbar for Propane gas.)
• This appliance has been supplied with a PROPANE REGULATOR (only use with Propane gas.)
• NEVER use an adjustable regulator with this barbecue, not suitable for (red) commercial
propane cylinders.
• Please contact your local gas supplier for advice on suitable gas bottles and regulators.
Caution
• If you smell gas – turn off the barbecue, extinguish all flames, open the barbecue hood. If the odour continues,
immediately contact your gas supplier.
• In the event of an uncontrollable fire, immediately disconnect the gas cylinder moving it away from fire and
contact the fire services. DO NOT PUT YOURSELF AT RISK!
• Ensure aerosols are not used near this unit when in use.
• Ensure all packaging and plastic bags are disposed of safely.
Siting Instructions
• This barbecue is for OUTDOOR USE ONLY and should be placed in a well-ventilated area.
• Take care to ensure that it is not placed UNDER any combustible surface.
• The sides of the barbecue should NEVER be closer than 1 metre from any combustible surface.
• Keep this barbecue away from any flammable materials.
• Important – Do not obstruct any ventilation openings in the barbecue body.
• Should you need to change the gas bottle, confirm that the barbecue is switched off, and that there are no
sources of ignition (cigarettes, open flame, sparks, etc.) nearby before proceeding,
• Inspect the gas hose to ensure it is free of any twisting or tension. The hose should hang freely with no
bends, folds, or kinks that could obstruct free flow of gas. Apart from the connection point, no part of the
hose should touch any hot barbecue parts.
• Ensure BBQ has cooled for 1 hour before folding down the side burner tray or removing the grease tray.
• Do not obstruct the ventilation openings of the gas cylinder compartment.
• Always inspect the hose for cuts, cracks, or excessive wear before use.
• If the hose is damaged, it must be replaced with a hose suitable for use with LPG and meet the national
standards for the country of use. The length of the hose shall not exceed 1.5m.
• N.B – The date on U.K orange hose is the date of manufacture, not the expiry date.
17