23
TROUBLESHOOTING
PROBLEM:
Device key does not blink when you press a
key.
SOLUTION:
Replace the batteries with two (2) new AA
alkaline batteries (see “Installing Batteries” on page 8).
PROBLEM:
Device key blinks when you press a key, but
home entertainment device does not respond.
SOLUTION:
Make sure you are aiming the remote control
at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM:
The remote control does not control home
entertainment devices or commands are not performing
properly.
SOLUTION:
Try all listed codes for the device brand
being set up. Make sure all devices can be operated with
an infrared remote control.
PROBLEM:
TV/VCR Combo does not respond properly.
SOLUTION:
Use the VCR codes for your brand. Some
combo units may require both a TV code and a VCR
code for full operation (see page 10).
PROBLEM:
No volume on a second TV.
SOLUTION:
Follow instructions under “Changing
PROBLEM:
Tried Search Method and still could not find
a working code.
SOLUTION:
Try the Search Method again after clearing
out the device key as follows:
a. Press and hold
SETUP
until device key blinks twice.
b. Enter
9 9 2
.
c. Press and release the device key to be cleared twice.
PROBLEM:
Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION:
For power on, these products require
programming TV codes on the remote control. For Sony,
use TV code 0000 and VCR code 0032. For Sharp, use
TV code 0093 and VCR code 0048.
