Universal Devices ISY-994i Series, Руководство пользователя

Страница: 230 / 692

Page | 207
10.4 Device Intensity Level Arguments
With a device you have several options on what can be performed with them. Depending on
if the device is a relay or a dimmer the ISY will provide the proper arguments for it. Here is
a list of what each argument equates to.
•
On/Off
o
On - sends the INSTEON "Single Tap ON" command
▪
On means 100% for dimmer devices, select a Level (1-99%) if this is
not the desired result.
▪
On will set a Scene to it's selected levels using the ramp rates set in
the scene.
o
Off - sends the INSTEON "Single Tap OFF" command
o
Fast On - sends the INSTEON "Double Tap ON" command
o
Fast Off - sends the INSTEON "Double Tap OFF" command
•
Level
o
Brighten - sends the INSTEON "Hold Press BRIGHTEN" command
o
Dim - sends the INSTEON "Hold Press DIM" command
o
Fade Up - sends a INSTEON "Manual Change Level UP" command, that says
active until an ISY "Fade Stop" command
o
Fade Down - sends a INSTEON "Manual Change Level DOWN" command, that
says active until an ISY "Fade Stop" command
o
Fade Stop - sends a INSTEON "Manual Change Level STOP" command, which
ends an active ISY "Fade Up" or ISY "Fade Down" command
•
Status
o
Query - triggers the ISY to check an "ISY node" for status