There are two control switches below the
XLR connector. Move switch #1 to its up
position ( ) to reduce low frequency
rumble. Move switch #2 to its down
position ( ) for a gentle boost in the
vocal articulation range. For a fuller sound,
move the mic closer to the source.
The SD-1 comes with convenient Apollo
Channel Strip Presets. These downloadable
settings for UA's Apollo audio interfaces
give you professional results, instantly.
Congratulations
Specifications
Your new UA Standard SD-1 Dynamic
Microphone is designed to deliver years
of uncompromising sonic performance.
The SD-1 is a high-quality dynamic
broadcast mic suitable for a wide range
of professional audio applications. With
its cardioid polar pattern and smooth,
transparent sound, it's particularly well
suited for capturing both music and
speech.
Universal Audio, Inc.
Used electrical and electronic equipment should not
be mixed with general household waste. Please
dispose in accordance with local regulations.
Description
Professional End-Address
Broadcast Microphone
Type
Dynamic
Polar Pattern
Cardioid
Frequency Response
50 Hz – 16 kHz
Output Impedance
200 Ohms
Sensitivity
-58 dB (0 dB = 1V/Pa at 1 kHz)
Adjustable Controls
Low Cut Filter (200 Hz): Off, On
Articulation Boost (3 – 5 kHz): Off, On
Output Connector
Balanced XLR3, pin 2 hot
10005621R7
Get Apollo Interface Presets
To get custom Apollo Channel
Strip Presets, scan the QR code
or visit
uaudio.com/mics/presets
