Universal Audio 1176LN Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 39

background image

Notice
_____________________________________________________________

ii

This manual provides general information, preparation for use, installation and operating instructions
for the Universal Audio 1176LN.

The information contained in this manual is subject to change without notice. Universal Audio, Inc.
makes no warranties of any kind with regard to this manual, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Universal Audio, Inc. shall not be
liable for errors contained herein or direct, indirect, special, incidental, or consequential damages in
connection with the furnishing, performance, or use of this material.

Copyright

© 2009 Universal Audio, Inc. All rights reserved.

This manual and any associated software, artwork, product designs, and design concepts are subject
to copyright protection. No part of this document may be reproduced, in any form, without prior written
permission of Universal Audio, Inc.

Trademarks

Universal Audio, the Universal Audio "diamond" logo, UAD, UAD Series, UAD-1, UAD-2, UAD-2 SOLO,
UAD-2 DUO, UAD-2 QUAD, "Powered Plug-Ins", 1176LN, 1176SE, Teletronix, LA-2A, LA-3A, LA-610, LA-
610MkII, 2-1176, 2-610, 6176, 710 Twin-Finity, 2192, 4110, 8110, SOLO/610, SOLO/110, DCS Remote
Preamp, Cambridge EQ, DreamVerb, Plate 140, Precision Limiter, RealVerb Pro, Precision Buss
Compressor, Precision De-Esser, Precision Maximizer and "Analog Ears | Digital Minds," are
trademarks or registered trademarks of Universal Audio, Inc.. Other company and product names
mentioned herein are trademarks of their respective owners.

Contents of This Box

This package should contain:

•

One 1176LN Solid-State Limiting Amplifier

•

1176LN Operating Instructions

•

IEC Power Cable

•

Registration Card

«
1
2
3
4
...
»

Содержание 1176LN








































Отзывы:

Нет отзывов

Похожие инструкции для 1176LN

Бренд: Channel D Страницы: 8

Бренд: Trace Acoustic Страницы: 13

Бренд: Yerasov Страницы: 8

Бренд: STK Professional Audio Страницы: 32

Бренд: R.V.R. Electronica Страницы: 40

Бренд: ZeeVee Страницы: 33

Бренд: Optimus Страницы: 23

Бренд: Sansui Страницы: 19

Бренд: Jolida Страницы: 17

Old School 51RT

Бренд: Mad Professor Страницы: 5

Pocket Rockit V2

Бренд: C-Tech Страницы: 11

Бренд: Jetter Страницы: 96

Band-Master Loudspeaker none

Бренд: Fender Страницы: 34

Бренд: Burson Страницы: 8

Class 5 H Valve Amplifier

Бренд: Marshall Amplification Страницы: 6

Бренд: Denon Страницы: 103

Бренд: B&K Страницы: 12

Бренд: Premier Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды