Univers by FTE U4113, Руководство пользователя

Страница: 30 / 39

PAG . 30
English
rev 1.1
SYSTEM SETUP
1. Display Mode is used to switch the display mode. You can
select from Auto / PAL / PAL-M / NTSC. Press [
] to
select the desired mode.
2. Aspect Mode is used to switch the screen aspect ratio mode.
You can select from Auto / 4:3 PS / 4:3 LB / 16:9. Press [
] to select the needed mode.
3. Video Output is use for switching the screen aspect ratio
mode. Now we provide below options: RGB / CVBS. You can
press [
] key to select each mode circularly.
4. VCR Loopthrought: If there is a VCR connected to the recei-
ver and, the receiver is connected to the TV, user can choose
what prefer to watch on TV when both equipments are connec-
ted at the same time. If the selection is “VCR master”, the VCR
will be showed even the receiver is on. If the selection is “STB
master”, the receiver will be showed on the TV.
5. Standard Mod.: To choose the modulator output standard.
Using [
] you can chose between: PAL-BG / PAL-I /
PAL-DK / NTSC-M.
6. RF Channel: This option allows you to determine the initial
channel that the built-in modulator is supposed to occupy. This
is important in the case that you wish to connect the receiver to
an existing network.
The output range is from channel 21 to 69. Press [
] to
change the value.
7. Press [Exit] to close the “TV System” menu.
5.3. TIME & TIMER SETTING
When you enter “Time & Timer Setting” a menu with three items
will be opened (OSD 63). Use [
] to select between the
three options and confirm with [OK].
5.3.1. TIME
When you select “Time” and press [OK] then you will see a
window like the one beside (OSD 64):
1. GMT Usage: This item is used to set the time by using the
time signal from the satellite. Press [
] to change the
setting.
2. The “GMT Offset” item is only available when “GMT Usage”
is set to “On”. Press [
] to set the “GMT Offset” value.
With every time you press the button the time offset will be
increased / decreased by half an hour.
3. “Date” and “Time” items are only available when the “GMT
Usage” is set to “Off”. Press [
] to select one item and
use number buttons to input time and date directly.
NOTE: If the current channel provides the correct time
information, you will see the current time after you entered
“Time” menu. If the channel doesn’t provide time information,
OSD 63
OSD 64
OSD 65
OSD 66