©Copyright 2020, UNITY Tactical. All Rights Reserved.
1
1
Remove the two screws holding the EXFIL
Accessory Cover Plate in place. Put them in a safe
location in case they are re-installed at a later
time. Leave the Accessory Cover Plate in place.
Using 10-32 x 7/16 Screws (Longer included
screws), secure MARK 2.0 assembly to the rail.
Lightly snug both screws before applying torque to
either. DO NOT EXCEED 10 IN-LBS.
WARNING: Over-torquing fasteners can damage your mount and will not be covered by warranty.
Team Wendy EXFIL
®
Rails
