UNITY Lasers ELITE 10 ILDA, Руководство пользователя

Страница: 13 / 32

UNITY Lasers s.r.o. Elite Pro series Operation Manual (Revision 2020-7)
13
Caution – use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
This Laser Product is designated as Class 4 during all procedures of operation.
REMINDER: In the United States, this laser product may not be purchased, sold, rented, leased or loaned
for use unless the recipient possesses a valid Class 4 laser light show variance from the US FDA CDRH.
OPERATION
INSTRUCTIONS FOR POWERING ON THE LASER SYSTEM
1. Connect power cable and E-stop.
2. Connect the 3-pin Interlock cable between the E-stop box and projector, pull up the red mushroom switch and
turn on the key switch. Press the start button. Confirm secondary estop port has either the bypass plug installed
or a secondary interlock device attached.
3. Connect the DB25 ILDA cable(s) to the projector. Then connect to any laser software box (for example
Pangolin QuickShow FB3 or FB4 hardware), and then select the pattern on software. Notice; please choose
“Allow laser output” in software.
See the next page for demonstration photos.