Unity Audio BOULDER MK II, Руководство пользователя

Страница: 8 / 20

8
Boulder user manual v1.1
MAINTENANCE
RUNNING IN
Speaker drivers contain moving parts. It is good practice to run in new speakers
prior to normal use for improved bass extension, sweeter highs and a smoother
performance overall. This process is also referred to as ‘breaking in’ or ‘burning in’.
Unity has run in the monitor for a period in test. However we recommend a run-in
period of at least 12 hours or overnight.
Having observed the warnings on page 3 of the manual, connect an audio playback
device (CD, MP3 player, etc.) to THE BOULDER speaker(s). Place the playback device
in loop mode and play dynamic music through THE BOULDER at a moderate level;
enough to drive (move) the speaker diaphragm a reasonable amount.
POWER
THE BOULDER voltage is factory set for your geographic region.
An arrow on the voltage setting label (see p. 12) indicates the voltage setting of THE
BOULDER.
IMPORTANT: ensure that THE BOULDER is set to the correct voltage for your region.
Voltage settings must be set by the factory and cannot be switched by the user. If
THE BOULDER is set to the incorrect voltage for your region, contact Unity Audio or
your local distributer. DO NOT power it up!