UniStream
™
Unitronics
3
Kit Contents
▪
1 HMI Panel: 7”
,
10.4”
or 15.6
”
➢
7” panel, includes 4 mounting brackets
➢
10.4” panel, includes 8 mounting
brackets and 2 panel supports
➢
15.6
” panel, includes
10 mounting
brackets and 2 panel supports
▪
1 panel mounting seal
▪
1 power terminal block
HMI Panel Diagram
HMI Panel Front and Rear View
1
Screen Protection
A plastic sheet attached to the HMI Panel screen for protection.
Remove it during installation of the HMI Panel.
2
Audio Outlet Seal
Prevents dust accumulation in the small outlet that serves the
HMI panel’s embedded speaker.
Caution
▪
Keep the seal in place when the embedded speaker is not used. The seal must
be kept in place for IP66 and NEMA 4X compliance.
3
DIN-rail structure
Physical support for the CPU-for-Panel, Uni-
I/O™ and/or Uni
-
COM™ modules
.
4
12/24VDC power
input
Connection point for the HMI Panel’s power source.
Connect the Terminal Block supplied with the kit to the end of
the power cable.
5
2 Ethernet (RJ45)
ports
Support high-speed Ethernet communications.
6
USB Device
Use for application download and direct PC-UniStream
®
communication.
7
2 USB Host ports
Provide the interface for external USB devices.
8
microSD slot
Supports standard microSD cards.
9
Audio-out jack
In addition to the HMI Panel’s embedded speaker outlet, this
3.5mm Audio-out jack enables you to connect external
amplifiers and speakers.
10 Auxiliary
connector (AUX)
Provides the electrical connection for the CPU-for-Panel.
11 Support Slots
Snap the supports
(supplied with 10.4”
and
15.6”
panels only)
into these slots, to hold it upright on a desk while programming.
