39
38
Selecting from multiple inputs using the
uStream
With only one audio source (e.g., from a
Bluetooth transmitter), each press of the access
( ) button will pause or resume the audio
source. You can completely stop the music by
pressing and holding the access ( ) button for
two seconds. It must be re-started using the
music device.
Multiple sound sources can be accessed
sequentially by pressing the access ( ) button.
After each press, the uStream selects the next
connected source in a fixed sequence.
If a source is not connected, the uStream will
skip over it and proceed to the next source.
Every connected audio source has a fixed place
in the sequence, as shown in the diagram.
Previously-active
hearing program
Bluetooth
music 2
Bluetooth
music 1
Resetting your uStream
If, for some reason, the uStream becomes
unresponsive:
1. Slide the uStream power switch to the on
position.
2. Press and hold the ( ), (
) and ( )
button simultaneously for two seconds.
3. Slide the uStream power switch to the off
position.
4. Wait for five seconds.
The uStream is now reset and will resume
normal operation when switching on again.
After resetting the Bluetooth pairings, the
configuration status and the grouping to the
hearing aids are kept.
