Unitron SMART ALERT, Инструкция по установке и эксплуатации

Страница: 19 / 52

What you need to do:
insert battery, connect adaptor,
test and install
1. Open the battery cover (8).
Connect the telephone cable to
the telephone connector (6)
and insert the adapter plug in
the telephone socket. Insert 9V
supplied battery by connecting
the battery contacts and close
the battery cover.
2. Press the test button (2). LED (1)
on the telephone detector will
illuminate, as will yellow LED
telephone icon on the remote.
The remote will also vibrate.
A beep alert will sound in
your hearing instruments.
Press acknowledge button
on the remote to stop alerts.
(If this does not work as described,
please see troubleshooting section).
3. To install, position on wall or any
level surface. Use either supplied
screws to suspend from key hole,
or self-adhesive velcro tape.
If tape is used, the wall on which
detector is to be positioned can
be cleaned using supplied wet wipe
for best adherence.
NOTE:
Do not place detector on floor.