RMM2 ROLLSCOPE MICROSCOPE
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
4
INTRODUCTION
Congratulations on the purchase of your new UNITRON
®
microscope. UNITRON
®
microscopes are
engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if
used and maintained properly. UNITRON
®
microscopes are carefully assembled, inspected and tested
by our staff of trained technicians in our New York facility. Careful quality control procedures ensure each
microscope is of the highest quality prior to shipment.
The RMM2 Series Rollscopes are portable, compact, metallurgical camera-microscopes designed for
measuring and photography of inaccessible or large objects that cannot be placed on the stage of an
ordinary microscope.
RMM2 models can be furnished with optional easy-to-read dial gauges at eye level. In addition, the
RMM models have the added feature of built-in graduated rack and pinion X-Y motion to traverse the
object being studied. This feature is most desirable when using high-power objectives, as well as in
choosing and composing areas for photography.
UNPACKING AND COMPONENTS
Your microscope arrived packed in a molded shipping carton.
Do not discard the carton
:
the shipping
carton should be retained for reshipment of your microscope if needed. Avoid placing the microscope in
dusty surroundings or in high temperature or humid areas as mold and mildew can form. Carefully
remove the microscope from the shipping carton and place the microscope on a flat, vibration-free
surface.
Unless you have specified otherwise, the RMM2 Rollscope is furnished with the following:
EYEPIECE:
10x Widefield high eyepoint
MICROMETER RETICLE:
Installed in eyepiece; engraved scale; 10mm with 0.1mm divisions or 0.4 inch
with 0.01 inch divisions depending upon model selected
ILLUMINATOR:
Vertical illuminator with condenser system, diaphragm, filter holder and two knurled
screws. Two filters (yellow and green) are included to enhance contrast. The knurled centering screws
are used to adjust the position of the bulb for optimum illumination. Also included are two types of bulb
socket and cord assemblies; one is used for AC operation with the transformer and the other is for DC
operation with batteries.
OBJECTIVES:
Plan achromat 5x, 10x, 20x & 50x
