Unitron Quantum Pro ITE, Руководство пользователя

Страница: 14 / 27

22 23
To affix the optional easy-t magnet:
1. Clean the telephone receiver.
Hold the magnet near
the “listening end” of your
telephone receiver and release
it. The magnet will flip to the
appropriate side and seek
the optimal position on the
telephone receiver.
2. Place the double-sided tape
in this optimal position on the
telephone receiver.
3. Attach the magnet to the tape.
Your hearing healthcare professional may also
have set up a phone program that you can access
through the push button on your hearing aids, or
through your optional remote control.
If your hearing aids are configured to work with the
wireless uDirect
™
2 neck worn accessory, you might
benefit from a Bluetooth
®
hands free option. Refer
to the uDirect 2 user guide for more information.
Caring for your hearing aids
Open the battery door when not in use.
Always remove your hearing aids when using
hair care products. The hearing aids can become
clogged and cease to function properly.
Do not wear your hearing aids in the bath or
shower or immerse them in water.
If your hearing aids do become wet, do not
attempt to dry them in an oven or microwave.
Do not adjust any controls. Open the battery
doors immediately, and allow your hearing aids
to dry naturally for 24 hours.
Protect your hearing aids from excessive heat
(hair dryer, vehicle glove box or dashboard).
Regular use of a dehumidifier, such as a Dri-Aid
kit, can help prevent corrosion and prolong the
life of your hearing aids.
Do not drop your hearing aids or knock them
against hard surfaces.
1.
2.
3.
® Bluetooth is a registered trademark of Bluetooth SIG Inc.