Unitron EXAMET-4 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 25

Unitron EXAMET-4 Скачать руководство пользователя страница 4

EXAMET-4 SERIES MICROSCOPE

UNITRON

®

73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com

4

INTRODUCTION

Congratulations on the purchase of your new UNITRON

®

microscope. UNITRON

®

microscopes are

engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if
used and maintained properly. UNITRON

®

microscopes are carefully assembled, inspected and tested

by our staff of trained technicians in our New York facility. Careful quality control procedures ensure each
microscope is of the highest quality prior to shipment.

UNPACKING AND COMPONENTS

Your microscope arrived packed in a molded shipping carton.

Do not discard the carton

:

the shipping

carton should be retained for reshipment of your microscope if needed. Avoid placing the microscope in
dusty surroundings or in high temperature or humid areas as mold and mildew can form. Carefully
remove the microscope from the shipping carton and place the microscope on a flat, vibration-free
surface.

MODELS

Reflected
#14250

Reflected
Trinocular
#14250

Camera is Optional

Reflected/
Transmitted
#14251

Reflected/
Transmitted
Trinocular
#14251

Camera is optional

«
...
2
3
4
5
6
...
»

Содержание EXAMET-4


























Отзывы:

Нет отзывов