Unitron 9732MC, Руководство пользователя, Страница: 4 / 8

dCSS/dSCR Multiswitch (Ref. 9732MC) v1.0
4
2. C
ONFIGURATION OF THE MODULE
Installation Mode
The device starts up in installation mode to check the equipment functionality and the correct
installation. In this mode the automatic gain control is frozen (commands for activating the
AGC are required). The multiswitch switches to SCR/CSS mode upon receiving a DiSEqC
message.
To activate one or more of the UBs a proper DiSEqC message should be received.
The installation mode starts up with the following 2 transponders active (both output signals
are having a fixed gain):
 Transponder 58 (Frequency: 11880 Vertical) placed in output IF 1281.
 Transponder 101 (Frequency: 12731 Horizontal) placed in output IF 2131.
CSS Mode
ONLY EN50494/SCR standard
For Installation with Legacy STB and PVR SCR compatible:
 Max 8 User Bands (UB0 to UB7) available (as in the LNB SCR)
 Signalling DiSEqC 1.0
ONLY EN50607/dCSS standard
For NEW Installation of HMG:
 16 User Bands for HMG in the range from UB0 to UB15
 Signalling DiSEqC 1.0 or 2.0
CONCURRENT EN50494/EN50607 standards
For existing MULTIVISION installations (Legacy STB/PVR SCR compatible), with main STB
upgraded to Next Gen PVR/HMG:
 Max 8 User Bands (UB0 to UB7) available for current STB/PVR
 16 User Bands for HMG in the range from UB0 to UB15
 Signalling DiSEqC 1.0 + signalling DiSEqC 2.0 in the same cable from LNB to apartment