Unitor AG-PRO 4, Инструкция по эксплуатации

Страница: 8 / 14

UNITOR AG-PRO 4 B
SPECIFICATIONS
：
＊
GRINDING WHEEL ----------------- 4”
＊
FREE SPEED --------------- 13,600 RPM
＊
AIR PRESSURE --------------- 90 PSI
＊
HOSE SIZE -------------------------- 3/8” ID
＊
AIR INLET -------------- 1/4” PT(NPT)
REF
NO.
PARTS NO. DESCRIPTION Q‘TY REF
NO.
PARTS NO. DESCRIPTION Q‘TY
1
752281 HANDLE (LEVER TYPE)
1 48
752313
SNAP RING 1
2 752282 VALVE BUSHING 1 49 752314 BALL BEARING (606) 1
3 752283 AIR INLET BUSHING 1 50 752315 BALL BEARING (629 Z) 2
4 752284 FILTER 1 51 752316 BALL BEARING (6202 Z) 1
5
752285 VALVE BODY CONNECTOR
1 52
752317
O-RING (52) 1
6 752286 VALVE BODY NUT 1 53 752318 FLAT RING (d22×D32×W4) 1
7 752287 SAFETY PIN 1 54 752319 SIDE HANDLE 1
8
752288 VALVE LEVER
1 55
752320
FLAT WASHER (M8) 1
9 752289 VALVE 1 56 752321 SPRING WASHER (M8) 1
10 752290 ROIL PIN (3.5×20) 1 57 752322 OUSTER SNEP RING (S-6) 1
11 752291 CONE SPRING (10×16×16) 1 59 752323 EXHAUST STACK 1
12
752292 INNER SNAP RING
1 61
752324
ALLEN HEAD SCREW (M5×35) 1
13 752293 O-RING (13) 1 66 752325 O-RING (66) 1
14 752294 O-RING (14) 2 67 752326 GOVERNOR VALVE 1
15
752295 SPRING
1 68
752327
GOVERNOR CAGE 1
29 752296 HOUSING 1 69 752328 GOVERNOR SPINDLE 1
30 752297 REAR PLATE SPACER 1 70 752329 GOVERNOR WEIGHT 1
31 752298 REAR PLATE 1 71 752330 SPRING PIN (Ø3×18) 1
32
752299 CYLINDER
1 72
752331
ADJUSTING SPACER (d8×D12×t) 1
33 752300 ROTOR 1 73 752332 PIN (Ø2.5×5) 1
34 752301 BLADE 4 74 752333 SPACER (d8.6×D12×W1.5) 1
35
752302 FRONT PLATE
1 75
752334
4” SERIES SPRING 1
36 752303 DRIVING GEAR (36) 1 79 752336 WHEEL GUARD 1
37 752304 DRIVING GEAR (37) 1 80 HEX. BOLT
(not supplied as spare)
1
38 752305 CASING REAR COVER 1 81 HEX. NUT
(not supplied as spare)
1
39 752306 CASING FRONT COVER 1 82 WASHER
(not supplied as spare)
1
40 752307 HANDLE ADAPTOR (M8) 1 102 752344 SPANNER 102 1
41 752308 ALLEN HEAD PLUG (1/8” PT) 1 109 756944 SPANNER 109 1
42
752309 ROLL PIN (Ø3×10) 1
110
756945
4” WHEEL SPINDLE (3/8”X24 UNF) 1
43 752310 KEY (3×8) 1 111 756946 WHEEL HOLDER FLANGE 1
44 752311 SPACER (d31×D35×W0.5) 1 112 756947 WHEEL NUT FLANGE 1
46
752312 ADJUSTING SPACER
2
402 75690 1
To get maximum performance and life of your tool, replace the whole set of parts included in the Spare part kits:
Tune-up kit 722801
Throttle valve overhaul kit 722819
Governor overhaul kit 722827
Bevel gear overhaul kit 722835
Revision date 05/2008