Unitek MICROPULL IV MP4/115, Руководство по эксплуатации и обслуживанию

Страница: 47 / 88

CHAPTER 3: OPERATING INSTRUCTIONS
MICROPULL
®
IV WIRE BOND PULL TESTER
990-180 3-19
11 If the "Echo Data to Disk File" field contains a "Y" all of the information received from the MP4 will be
reformatted into a Lotus 1-2-3 ".PRN" file. The Disk File named on the Change Header Screen will be
over-written whenever the Echo feature is selected.
DESTRUCT TESTING
TEST PULL(gf)
16 11.7 gf
Save Histogram Data to PULLS.TXT (Y/N) ? N
Erase Histogram Data from Memory (Y/N) ?
12 If the "Increment Serial Number" Query was answered <N>, the request for a new serial number will be
made at the completion of each assembly in the following manner, where A-123456 represents the
previous serial number. The operator keys in the next serial number followed by <Enter>.
DESTRUCT TESTING
TEST PULL(gf)
16 11.7 gf
Enter Next Serial No. A-123456
13 To exit this program, press <F9>. This closes all open files, enables the MP4 RS-232 port and restores
BASIC Default Legends to the bottom of the screen. Type SYSTEM <Enter>, to return to DOS.
Printed Reports
1 The format of the data generated when the MP4 is connected directly to a serial printer is:
2.5 gf VALID TEST 25 mN VALID TEST
2.7 gf VALID TEST 27 mN VALID TEST
2.7 gf VALID TEST 27 mN VALID TEST
2.5 gf VALID TEST 25 mN VALID TEST
2.6 gf VALID TEST 26 mN VALID TEST
2.5 gf VALID TEST 25 mN VALID TEST
1.2 gf WIRE BROKE 25 mN VALID TEST
.0 gf NO TEST 26 mN VALID TEST
0.9 gf FALSE ERROR 7 25 mN VALID TEST
2.5 gf WIRE BROKE / HOLD TIME 26 mN VALID TEST