4
Variable suction control
Note:
Once all attachments are in place, unwind a sufficient length of cable and insert the plug into the
wall outlet. A yellow mark on the power cord shows the ideal cable lenghth. Do not pull the power
cord beyond the red mark.
1.
Insert the power plug into the wall outlet.
2.
Press the power on/off button located the unit to turn the vacuum cleaner “on”.
3.
To rewind the power cord, press the cord rewind button with one hand and guide the power
cord with the other hand to ensure that it dose not whip causing damage or injury.
4.
To adjust the suction, slide the speed control button on the suction hand to control the suction
power of the vacuum cleaner.
Motor thermostat (Optional)
Important:
This motor is equipped with a motor protective thermostat. If for some reason the vacuum
cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur
unplug the vacuum cleaner from the wall outlet and turn off switch, change dust bag and clean
filters. Allow the unit to cool for approximately 1 hour. To restart, replug into wall outlet and turn
switch back on.
Change dust bag.
1.
Open the front cover.
2.
Change dust bag.
1 2
Rewind button
On/off button
Speed control
