USE
1. Speed control
Speed is controlled by pressing the SPEED button.
0 = Off, 1 = Low, 2 = Medium, 3 = High
2. Swing function
Press the swing button on the switch box, to activate the oscillation function for
widespread breeze distribution. Press the button again to stop oscillation when the fan
head is in the desired position.
3. Timer
Press the timer button to set the timer in increments of 0.5 hour to a maximum of 7.5 hours,
each step is 0.5H.
4. Tilt adjusting
Air flow can be adjusted up or down, moving the fan’s head up or down to the desire direction.
5. Height adjusting
From the extension pole loosen the height adjustment ring and slide the inner tube to the
desire height. Once you have selected the desired height re-tighten it.
REMOTE CONTROL
1. Mode
Press MODE on the remote control to change the fan mode through different breeze
modes.
Sleep
Nature
Normal
Note: SLEEP and NATURE function only can be controlled by remote control.
2. Fan Speed Adjustment
Press SPEED button to select LOW, MEDIUM or HIGH speed.
3. Swing Adjustment
Press the swing button, to activate the oscillation function for widespread breeze distribution.
Press the button again to stop oscillation when the fan head is in the desired position
4. Timer Adjustment
Press the timer button to set the timer in increments of 0.5 hour to a maximum of 7.5 hours,
each step is 0.5H.
MAINTENANCE
1. Switch off and unplug from the power supply before assembling or disassembling and
cleaning
2. Gently wipe the fan blade and grilles with a damp cloth. If the fan is very dirty use a wipe dry
damp cloth. Do not use cleaning detergents, sprays or other chemicals, as they will damage
the fan.
3. Store the fan in the original packing in a ventilated dry area.
4. The motor bearings are permanently sealed and do not require any additional lubrication.
