OPERATION:
1. Set the fan on a level dry surface.
2. Plug the power cord into a standard AC 220-240V wall outlet.
3. Rotate the
speed key to set the desired speed 3=“HI” 2=“MED”
1=“LOW”.
4. Rotate back to the position
0=“OFF” key to turn the fan off.
5. To start or stop the fan head oscillation, press or pull the oscillating knob
on the top of
the motor housing.
6. To change the air flow angle, move the head forward or backwards.
MAINTENANCE
Always turn off the fan and remove the plug from the socket-outlet
before cleaning.
Clean the external surfaces of the fan with a soft damp (not
dripping wet) cloth.
WARNING:
Do not immerse the fan in water.
Do not use any cleaning chemicals such as detergents and
abrasives.
Do not allow the interior (special for the PCB) to get wet as
this could create a hazardous situation.
When the unit is not in use, make sure that it is unplugged from the
wall socket. To store the fan, you may pack it in the original carton
and store it in a cool and dry place until later use.
In case of malfunction or doubt, do not try to repair the fan yourself;
it may result in a fire hazard or electric shock.