STRUCTURE
1.
FRONT GUARD
2.
FAN BLADES
3.
GUARD MOUNTING NUT
4.
BACK GUARD
5.
MOTOR SHAFT
6.
MOTOR HOUSING
7.
OSCILLATING KNOB
8.
SWITCHES
9.
SWITCH COMPARTMENT
10.
LOCK SPRAIN
11.
UPPER TUBE
12.
TUBE CONNECTOR
13.
LOWER TUBE
14.
CROSS BASE
SPECIFICATIONS
VOLTAGE
FREQUENCY
POWER
220-240V~ 50Hz
55W
ASSEMBLY
1.
Secure lower tube with tube support to the 2 pieces of the cross base using the screws provided.
2.
Extend upper tube, insert the tube connector through upper pipe onto lower tube and tighten.
3.
Attach the motor with switch compartment onto the upper tube. Ensure the switch compartment
is pushed fully onto the upper tube and secured with the screw provided.
4.
Loosen Guard Mounting Nut from the Motor Housing.
5.
Position Back Guard firmly to Motor Housing and then fasten by turning Guard Mounting Nut
clockwise tightly.
6.
Push the Blade along Motor Shaft. Fasten it firmly with Spinner by turning counter clockwise.
7.
Place the front grille securely on top of the back grille and lock in place using the securing clips.
OPERATION CONTROL
♦
Before using the fan, make sure that it is on a flat and stable surface. Damage may occur if the
fan is placed on an incline.
♦
Insert the plug directly into a standard AC socket-outlet. Be sure that the plug fits tightly into the
socket-outlet.
♦
Select the desired speed by pressing buttons 1 and up to 3. Select the 0 button to switch off
♦
Timer: Select from the timer knob the desired time from 10 to 60 minutes
♦
Oscillation: Press and depress the relative oscillation knob on the housing of the motor to enable
or disable this function
CAUTION
♦
Do not use this appliance near water.
♦
Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
♦
Never immerse the motor unit, cord and plug into water
♦
If the appliance fell down into water, unplug it immediately, then take it out and bring it to
authorized Service Center for checking
♦
Never use the appliance with wet hands
♦
Never use the appliance on a damp floor
♦
Never use the appliance with an extension lead
♦
Never use the appliance with the damaged wall outlet
♦
Any examination, repair or adjustment must be done in an authorized Service Center.
♦
Do not repair the appliance by yourself! If the
opening of the appliance is detected, the
appliance's guarantee
will be canceled.
♦
Never use the appliance near or on the hot surfaces
♦
Never let the cord hang over the edge of the table or touch any hot surfaces
♦
Always unplug the appliance when not in use/before cleaning
♦
Do not let children play or use the appliance
♦
Give a high attention when the appliance is being used near the children
♦
Use the appliance only for it’s direct purpose
♦
Never expose the appliance to fall down or to be kicked
