W Mode (Weekly timer Mode)
Press
to change the mode from standby mode to operating mode, the display appears as below image 5,
appears on the screen.
Press
to choose weekly timer, for example, Monday to Friday, or Monday to Saturday, or Wednesday, Friday.,
etc....., see image 6.
Press
to set the start time, press
to set the stop time. For example, press
to 9:00, this means
that from 0:00 to 9:00, the heater will be in operation, then press
to set the stop time, if set 12:00, the heater
will stop at 12:00, and then press
and
again until 24 hours have been set. When the setting is finished,
the current time will be displayed, see image 7.
Image 5 Image 6
Image 7
Child clock
Long press
,
will be displayed on the screen, so you cannot make any operation. Use the same way to
cancel the child clock function.
Remote control and control panel:
1. “
SET
” P, W, S three modes to choose and set current week.
2. “
MODE
”
Reserve week.
3. “
” Set child lock.
4.
“
”
Adjust the power.
5.
“
”
Set open appointment time and increase temperature.
6.
“
”
Set close appointment time and decrease temperature.
