1.
Turn the switch to “I” position, the heater blows warm air and operates at
1000W.
2.
Turn the switch to “II” position, the heater blows warm air and operates at
1500W.
3.
Turn the switch to “Ⅲ” position, the heater blows warm air and operates at
2500W.
4.
Turn the switch to “O” position, the heater stops operating and the indicator
light will be off.
•
Insert the wheels into the bottom part of the supporting feet, and make sure that it
is tight enough.
•
Turn the appliance upside down, fix the feet to the appliance with the screw.
•
This heater is protected with an overheat protection that switches off the appliance
automatically in case of severe overheating. If the device operated, please turn the
heater off, unplug the appliance and let it completely cool, inspect for blockage of
any air inlet or outlet, and attempt to restart the heater then after.
•
If the heater fails to operate or the device switches off again, please contact the
nearest service center for examination or repair
OVERHEAT SAFETY DEVICE
ASSEMBLY
USE
