IMPORTANT
Read these instructions
fully before using the heater. Retain
these instructions for future reference.
ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied
separately in the carton), must be fitted to
the unit. These are to be attached to the
base of the heater using the 4 screws
provided, taking care to ensure that they
are located correctly in the bottom ends of
the heater side moldings
SAFETY INSTRUCTIONS
(to be read before
operating the heater)
-Do not use the heater unless the feet are correctly
attached.
-Ensure the power supply to the socket
,
into which the
heater is plugged
,
is in accordance with the rating label
placed
on the heater and that the socket is earthed.
-Keep the mains lead away from the hot body of the
heater.
-Do not use this heater in the immediate surroundings of
a bath, a shower or a swimming pool.
-Never place the heater where it may fall into a bathtub or
other water container.
-Do not use outdoors.
-Do not cover or obstruct any of the heat outlet grilles or
the air intake openings of the heater.
-Do not place the heater on carpets having a very deep
pile.
-Always ensure that the heater is placed on a firm
level surface.
-
Ensure that the heater is not positioned close to
curtains or furniture as this could create a fire hazard.
-Do not position the heater in front of, or immediately
below, a wall socket.
1