ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied
separately in the carton), must be fitted to the
unit. These are to be attached to the base of
the heater using the 4 screws provided,
taking care to ensure that they are located
correctly in the bottom ends of the heater side
moldings
SAFETY INSTRUCTIONS (to be read before operating the heater)
Do not use the heater unless the feet are correctly attached.
Ensure the power supply to the socket into which the heater is
plugged is in accordance with the rating label on the heater and that
the socket is earthed.
Keep the mains lead away from the hot body of the heater.
Do not use this heater in the immediate surroundings of a bath, a
shower or a swimming pool.
Never place the heater where it may fall into a bathtub or other water
container.
Do not use outdoors.
Do not cover or obstruct any of the heat outlet grilles or the air intake
openings of the heater.
Do not place the heater on carpets having a very deep pile.
Always ensure that the heater is placed on a firm level surface.
Ensure that the heater is not positioned close to curtains or furniture
as this could create a fire hazard.
Do not position the heater in front of, or immediately below, a wall
socket.
Do not insert any object through the heat outlet or air intake grilles of
the heater.
Do not use the heater in areas where flammable liquids are stored or
where flammable fumes may be present.
The appliance is not intended for use by young children or infirm
persons without supervision.
Young children should be supervised to ensure that they do not play
with the appliance.
Always unplug the heater when moving it from one location to
another.
Do not use the heater if the power cord is damaged. If the power
cord is damaged it must be replaced by a recognized service agent or
