4
PORTABLE BLENDER FUNCTION
This appliance is provided with a portable plastic cup for your convenient carrying and directly
drinking.
1. Place the motor unit on the flat surface. Make sure the power outlet is unplugged.
2. Place the portable cup on a flat surface with the open ending facing up. Fill the cup with your favorite
ingredients. Be sure not to fill ingredients
exceed the 600ml mark, you can put 240g carrot and 360g water.
Note:
For optimal performance, place desired ingredients in the cup according to the following order: liquids,
fresh ingredients, frozen fruit, yogurt and ice cream.
3. It must be noted that peeled or cored the fruit or vegetables and then cut it into small dices; general the size
of fruit or vegetable dices is 15×15×15mm. The seedcase of fruit or vegetable must be peeled, such as carrot,
pineapple, lemon, grape, tomato.
Note:
Never use boiling liquids or run the appliance empty.
4. Assemble the cup base onto the opening end of the jar by turning it in clockwise.
5. Upend the assembly of cup and cup base, and insert them into the motor unit, make sure arrow on the
motor unit align with the cup base, then turn the cup base in clockwise to lock them.
6. Connect the plug to wall outlet and turn the speed selector to the desired setting.
The setting 1 is the lowest
speed and the setting 2 is the highest speed.
Note:
The appliance can be operated without interruption for a maximum of 3 minutes, after which it should be
allowed to cool down to room temperature.
7. When the operation is finished, unplug the power outlet . Then turning the cup assembly in anti-clockwise to
remove them.
8. Upend the cup assembly, hand the cup with one hand, and turning the cup base in anti-clockwise with the
other hand to remove it.
9. Then assemble the cup lid on the cup. Take the cup with you throughout the day to stay hydrated. When
you need to drink, you just need to open the spout lid to serve easily.
Note:
After you have consumed your blended beverage, wash out the cup and reuse it throughout the day for
water or other cold liquids.
CLEANING AND MAINTENANCE
The Auto Clean feature can clean the blender and blade assembly easily and rapidly in complete safety.
-After use, reassemble the jar(or cup) and pour a little warm water into it and turn the speed selector to Pulse
position for a few seconds to remove the residual food.
-After stop, remove the jar (or cup) from the motor unit and rinse the jar (or cup) under running water.
-Wiping the outer surface of motor unit with a damp cloth, do not use abrasive cleansers. Never immerse in
water or other solution for cleaning.
-Dry all parts and then replace them.
Warning:
Do not use abrasive cleansers. Never immerse in water for cleaning.
Note:
The blade is very sharp, handle carefully when clean.
