The big attachment can cut hair for the length of: 18 mm, 21 mm, 24 mm, 27 mm, and
30 mm.
Select the attachment according to the length of cutting.
Insert it into the side guiding grooves of the clipper.
Replace one attachment removing it and inserting another as described above.
Cleaning and maintenance
Do not hold the adaptor with wet hands while plugging and unplugging form mains
supply outlet.
The adaptor and supplying cord should be always dry.
It is forbidden to immerse the hair clipper in water or other
liquids for cleaning, as the device is not waterproof. It can
damage the live parts (accumulators).
Always switch off the hair clipper and unplug the adaptor from
the mains supply outlet before cleaning and
–
–maintenance.
Remove the comb attachment from the hair clipper.
–
–
In order to remove the cutting head, press forward cutting head
with your thumb, in order to release the cutting head from the
frame.
If necessary, rinse the plastic comb attachments under running
water, and then dry them thoroughly.
Remove the remains of hair from the cutting head with attached
cleaning brush.
Insert the protrusion of cutting head back into the locking hole in the frame of cutting
