6
Push Button Functions
A. Power Push Button
B. Fan Speed Push Button
C. Adjustable Humidity Push Button
D. Timer Push Button
E. Louver setting Button
F. ION Button
OPERATING INSTRUCTIONS
1. The Power indication light will turn on in green when the unit is plugged in, regardless of
whether the unit is operating or not.
2. Press
“Power Push Button” once to start operation. Press it again to stop operation.
3. Press
“Fan Speed Push Button” as follows
：
Press to set the desired fan speed. It can be adjusted between high speed and low speed.
4. Press
“Adjustable Humidity Push Button” to set the desired humidity level in the room,
which can be set from 40% to 80% at 5% intervals.
After a period of working, when environment humidity is lower than the selected humidity by
2%, compressor will stop and fan stops working 3 mintues later; When environment humidity
is equal to or higher than the selected humidity by 2%, compressor will restart once 3-minute
compressor protection time over.
5. Press
“Timer Push Button” to set the timer
：
Press the button to program the time when the unit turns on and turns off. If you want to
cancel the timer programming, press the button to adjust the time at 00, and each time you
press the button, it will be circulate from 00-01-
02……23-24. It is the programmed time to
switch the machine. The programmed time will be cancelled if you push the power button.
The programmed time remains unchanged if the machine stops to operate due to water full
or during defrosting
6.
“Louver setting Button”
：
Press
“Louver setting Button” to set swing function and the indication lights
。
7. Press
“ION” button
When press
“ION Button”
，
the Ion function will be open and the indication lights.
