Page
35
of
54
9.7
Active call
When a call is active, the base displays the active call, and the audio path is connected between the far-end
party and Clave Headset
(Fig.26)
. It is not possible to have more than one active call on a single line at the
same time.
Fig.26 Active call
9.8
On-hold call
When a call is put on-hold, the base displays a hold call status and the audio path is disconnected between
the far-end party and the Clave Headset
(Fig.27)
. It is not possible to set EHS active call on-hold by the
base.
Fig.27 Two calls, one on hold
9.9
Multiple calls
There is more than one call existing in a single line
(Fig.28)
.
Fig.28 Multiple calls
NOTE:
EHS and DHSG lines do not support multiple call.
That is because there is only one available path for the
audio track. If we are using for example DHSG line with a
desk phone and there are multiple calls on the desk phone,
user has to toggle/control those via the desk phone
interface. For more details on the EHS and DHSG
connections refer to
10.2 EHS interface
and
15. Appendix
C: EHS and DHSG API.
