GB│IE
│
19
■
UAV 250 A2
Inserting credit cards
■
Insert the credit card from above into the middle of the CD/credit card cutter
opening
5
. You can only shred one credit card at a time . Always insert the
card into the CD/credit card cutter opening
5
with the wide side first .
Otherwise, the magnetic strip will not be destroyed .
NOTE
►
Always insert the credit card into the middle of the CD/credit card cutter
opening
5
. Otherwise, the shredding process will not start!
NOTE
►
If the shredding process does not start when you insert the credit card, care-
fully push the credit card further into the CD/credit card cutter opening
5
with a flat object .
NOTE
►
If you want to ensure that the information on the magnetic strip is irrevocably
destroyed, insert the credit card into the middle of the cutter opening for
paper
6
.
Note that the residue will then fall into the large waste container
4
.
If necessary, empty this beforehand in order to keep paper and plastic
waste separate .
Inserting a CD
WARNING! RISK OF INJURY!
►
Never insert your finger into the central hole of a CD when you are feeding
it into the appliance .
■
Insert the CD from above into the middle of the CD/credit card cutter
opening
5
. You can only shred one CD at a time .
Clearing a material blockage
1) Move the switch
9
to the “REV” (“reverse”) position if the paper being
shredded causes a blockage . The appliance now goes into reverse and
the paper that is being shredded is ejected .
2) Move the switch
9
to the “OFF” position as soon as the jammed material
has been ejected .
Turning off the appliance
■
Switch the appliance off by moving the switch
9
to the position “OFF” . The
“Power” lamp
7
goes out .
Содержание UAV 250 A2
Страница 3: ...B A...