UNITED OFFICE 366662 2101, Инструкция по эксплуатации и правила безопасности

Страница: 12 / 134

GB
│
IE
│ 9 ■ ULG 350 B1
Lamination process
♦ Place the pouch centrally on the small supporting surface at the pouch slot
1
.
If the size permits, the pouch should be placed with the closed side towards
the pouch slot
1
.
♦ Slide the pouch slowly and straightly into the pouch slot
1
.
♦ When you have slid the pouch several centimetres into the slot
1
it will then
be pulled in automatically . Release the laminating pouch as soon as you
notice it being pulled in automatically .
IMPORTANT
► Ensure there is at least 30 cm of open space in front of the laminator . Oth-
erwise, the pouch will not be ejected completely from the laminator after
lamination . This could damage the pouch .
♦ The finished and laminated pouch is ejected from the pouch ejector slot
7
of the laminator .
NOTICE
►
Only after hot lamination:
When the finished laminated pouch is
ejected from the pouch ejector slot
7
of the laminator, it is hot and can
easily change its shape . For this reason, let the laminated pouch cool for
one minute before touching it .
► To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a file folder or any other heavy, flat object . This will
give it a smooth and flawless surface .
♦ If you do not wish to start another laminating procedure, move the On/Off
switch
5
to “ OFF “ and rotate the pouch thickness switch
4
to the ABS
position .
♦ Disconnect the plug from the mains power socket .
Anti-blocking function
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance .
♦ Turn the anti-blocking switch
4 to the position ABS . The pouch will no longer
be drawn in .
♦ Remove the pouch and turn the anti-blocking switch
4 back to the desired
pouch thickness .
♦ Re-start the lamination process .