UNITED OFFICE 327170 1904, Руководство по эксплуатации

Страница: 10 / 34

UAV 190 B2 GB│IE│NI│CY
│
7 ■
Cleaning
DANGER – ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance. There is a risk of
electric shock!
WARNING – RISK OF INJURY!
► The cutters in the appliance are very sharp! Risk of injury!
CAUTION! MATERIAL DAMAGE!
Do not spray any oil or other lubricants into the cutter opening .
These can irreparably damage the appliance.
● Remove any residue left in the cutting opening or cutting blades with a
suitable tool, e.g. a pair of tweezers. Ensure that the appliance is unplugged
before doing this!
● Clean the appliance with a moist cloth. For stubborn dirt, add a little mild
detergent to the cloth.
Faults
If the paper jams:
This means that you have attempted to feed too much paper into the appliance
(max. 6 sheets 80 g /m
2 paper).
● Move the switch into the “REV” position if the paper causes a blockage.
The appliance now goes into reverse and the material that is being shredded
is ejected.
● Pull the paper out of the appliance and then set the switch to “AUTO”.
● The appliance is now ready for use.
If the appliance suddenly stops working:
This means that the appliance is overheated and the automatic safety cut-out has
activated itself. The overheat LED
lights up red.
WARNING – RISK OF INJURY!
► Remove the power plug from the wall socket to avoid unintended restarting
of the appliance.
● Place the switch in the “OFF” position.
● Allow the appliance to cool until it has cooled to room temperature.
● Put the mains plug back into the socket.
● Switch the appliance on by moving the switch into the “AUTO” position.