DNA-CAR-550 Carrier Board
Chapter 1
3
Introduction
Edit: TBD
Checked: TBD
Date:210
Vers:
Draft
Scheidt & Bachmann
550_Chap1.fm
© Copyright February 15, 2010 Scheidt &
Bachmann USA
www.ueidaq.com
Vers:
1.0
printed February 2010
Fax: 781-821-2891
Electronic Industries, Inc.
-821-2890
Tel: 508-921-4600
www.ueidaq.com
Vers:
1.2
Date: February 2010
550_Chap1.fm
© Copyright 2010 all rights reserved
United Electronic Industries, Inc.
Figure 1-2. UEIPAC Cube with CAR-550 Module Carrier
Figure 1-3. CAR-550, UEIPAC NIC, and PPCx-CPU Assembly
1.3
Functional
Description
The purpose of the DNA-CAR-550 is to provide an industry-standard wireless
interface between UEI UEIPAC GigE-based programmable automation
controllers and the Internet. The CAR-550 accepts a standard PCI Express Mini
Card that is compatible with a wide range of COTS cell, WIFI, and other
communication cards, some of which include a direct GPS interface. Note that
only Mini Cards that are based on the USB 2.0 interface are supported by the
CAR-550 board.
MAIN antenna
AUX antenna (if used)
DNA-CAR-550 Layer
NIC Layer
CPU Layer
Sierra Wireless
Mini Card (snapped
into place)
Connect to wireless
coaxial connectors
on front panel of
Cube
MAIN
AUX
