z
TECHNICAL SPECIFICATION
z
PAGE : 2
Microcontroller based indicator with inbuilt Temperature & RH measurement in single enclosure.
Incorporates highly stable built-in or Remorte Temp.+ RH sensor.
2"/4”/6” bright LED display for displaying RH & Temperature.
Process parameter Hi and Low
tatus indication For
channels, if applicable.
User selectable set limits for process value violation.
Inbuilt buzzer to audible process value violation.
Password protection for calibration and programming mode.
Software Calibration for 2 channels.
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
Programmable devise address, baud rate, (max no. of device is 1-256).
Remote programmable from master device.
User programmable offset correction.
Compact, Wall mount arrangement available.
Brick and modular wall mounting and flush mounting.
FDA21 CFR part 11 compliance data logging software available
.
LEDs. S
both
Ex. Flameproof model available for Hazardous applications.
Technical data
Technical Specification
Flame
Proof
Material of constructions
Cable entery
Gas group
Enclose certification
Display glass
Degree protection
I IIA IIB as per IS 2148/1981
Enclosure is certifies by C.M.R.I. dhanbad
Clear glass thognet type A as per Is 2206
IP 65 as per IS 2147
5 x 3/4 “ ET
Aluminum alloy
Nos. of input
Input
Indication
Range
Accuracy
Transmitter power supply
Comunication
Programmable
Parameters
Temperatures input
2 nos .(TEMP + RH )
Humidity input
Integral Or Remote (external)
Integral Or Remote (external)
24V/5V DC @ 30 mA max, isolated from I/p & O/P.
Temperatures
Humidity
Channel-1 : 4/3 digit Seven segments 2”,4”,6” RED display.
Channel-2 :
.
4/3 digit Seven segments 2”,4”,6” RED display.
LEDs for visual alarms & LED for 485-comm.
Temperatures
Humidity
0 to 60.0
with decimal point.
°C
0 to 99.9 % with decimal point.
Display Resolution
0.1 for Temp. & Rh
Temperatures
Humidity
+
1
0.25 % on FS
Response time :
sec
+
Response time : 4 sec
2.5 % for 10 to 90 % RH rest of 3%
Status indication
Read /write parameter
Read: Procces value ,decimal point. Write: Hi Low set point.
Programmable parameter
Modbus RTU RS- 485 Isolated communications.
Baud rate , Parity , Node address , stop bit.
Communication Protocol
Full range as per input selection.
Programming of parameters
Through 4 tactile keys (with password protections)
No. of slave ID
Total 1-256 unit.
Alarm logic
Full Scale hi OR Full scale Low
Set point / High scale / Low scale
+91 94273 01436
Sales:
www.utplindia.in
Website:
Sure for service with hi-end
versal
nology
Uni
Tech
Sure for service with hi-end
versal
nology
Uni
Tech
E-mail :
Add.-78/1/Z/3, Makarpura GIDC, Makarpura, Vadodara
Ph
:
+91 7046223333
Model No. : UT-1803
Содержание UT-1803
Страница 12: ......
