@
+91 7046223333 , 9427301436
www.utplindia.in
www
2
1.
Introduction
1
Function
Mount Anywhere
The UT-1102 product group is Process control instruments that must be panel mounted. The wiring terminals
-
must be provided. the UT-1102 is environmentally hardened and, if suitably handled, can be mounted virtua
-lly anywhere in plant or factory; in a panel or enclosure wall mounted or Flameproof enclosure or even on
the process machinery. it can withstand ambient temperature up to 50°C
1. OVERVIEW
1.2 Safety Notes
Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by UNITECH Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
UT-1102
SIGNAL ISOLATOR
Unitech Instrument’s Universal Signal Isolator is the best for isolation input & Output Signal. It accepts
variety of inputs & gives mA or Voltage Signal as output. It also acts as Convertor/multiplier as it accepts
different type of input signals & gives variety of output.
Additionally internal transmitter power supply of 24VDC is provided to power up two-wire transmitter. For
long-term accuracy of the instruments low drift precision components are used while all instruments und-
ergo a burn-in for better reliability.
The device may only be used in approved temperature range.
Ø
The opening of the case should only be done by qualified personnel.
Ø
The instrument should never be placed in the highly power noise environment.
Ø
You should not make any technical changes on the device
Ø
The appliance should only be cleaned with a clean damp cloth OR use only pH-neutral cleaner.
Ø
Содержание UT-1102
Страница 8: ......
