Getting Started
When RS804 is connected to a power source, please check the LED status to make sure when
to connect with the utility. Please noted that if the power is off and restarts it again, the LED
process will start over from the beginning.
When the power is on :
Power LED :
Green Solid On
Status LED : Step 1 :
Red Solid
(for about 12 secs )
Step 2 :
Red Flashing
(for about 25 secs)
LED goes off for about 50 secs
(LLRP is about to start.)
Step 3 :
Green Flashing:
Ready to connect with the utility
(Users now may start to connect RS804 to the PC/ Laptop )
Step 4 :
Green Solid:
successfully connected
Checking the LED status
LED Description
Power LED
Off:
Power Off
Alternating Orange and GREEN:
F/W upgrade
Green Solid:
Power On, No F/W upgrade
Status LED
Red Solid:
System powering up, bootloader stage
Red Flashing:
RFID module not available, Linux system operation in progress.
Green Flashing:
Ready to connect with the utility
Green Solid:
Connected, no errors
Wi-Fi LED
Off:
No Wi-Fi connected
Green Solid:
Wi-Fi connected
Red Flashing:
Data Transmission
User LED
Controlled by User
Antenna LED
Off:
Antenna isn't operating
Green Solid:
Antenna is operating
