Charging the Battery with the Docking Station
1. Plug the AC Adapter cable into the Docking Station's power jack, and then connect the AC
Adapter into an electrical outlet.
Terminal LED indicators
from left to right:
-- GPRS/Bluetooth
Communication
-- Scan
-- Power
2. Slide the RH768 into the Docking Station until it
clicks into place.
3. The connection is secure when the bottom edge of
the device aligns with the docking station. (The
Docking Station's LED indicator lights up green,
while the RH768's LED indicator lights up red.)
Cradle Power/Communication
LED indicator
LED Status
LED
Status
Description
Flashing Yellow GPRS module is enabled.
GPRS/Bluetooth
Flashing Blue
Bluetooth module is
enabled.
Solid Red
Ready for Reading
Scan
Solid Green
Successful reading
Solid Red
Being charged
Terminal
Power
Solid Green
Fully charged
Solid Green
Power is on
Cradle
Power/Communication Flashing Green Data synchronization is
active.
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon appears on the
device screen indicating low or very low battery status. In both cases, perform an ActiveSync
operation to back up your data, and then recharge your device as soon as possible.
CAUTION!
Once the device is shut down, you should recharge the device within 48 hours.
Otherwise you will lose all data including files stored in the RAM memory.
8
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.