38
Unitech PT930SA
To avoid conflict with your LAN environment, please consult with your MIS depart-
ment for the correct TCP/IP setting.
If there is no DHCP server in your LAN environment, specify the individual IP
address on each PT930 with the following steps:
Specifying an IP Address
Obtaining an IP Address via DHCP Server
Please check with your MIS department to determine whether a DHCP server is
available in your LAN environment. If available, tap the radio button
Obtain an IP
address via DHCP
, and then tap the
OK
button.
Tap the
Name Servers
tab,
and then input the proper
Primary DNS, Secondary
DNS, Primary WINS,
and
Secondary WINS.
Input the proper
IP address,
Subnet Mask,
and
Default
Gateway.
Tap the radio button
Specify
IP Address.
Note
: To change the above settings, please perform the following steps:
Select the proper RF
card driver and then
tap the
Properties
button.
Double tap the
Net-
work icon
.
Tap
Start, Control
Panel.
