background image

 

PT630D User Reference Guide 

 unitech Electronic CO. LTD 

Unitech Part Number: 400412 

 

20

4.2 How to Create a FormCaching 

 

 

You will need to enter Supervisor mode and select “4.FORM” category in order to set the configuration of 
FormCaching (refer to the 

PT630D

 

Programming Reference Manual

 for how to enter the Supervisor mode). 

After selecting the “4.FORM” in Supervisor mode, the screen will show as above. The system will first ask 
user to specify four categories of the field specification including 

field prompt, data length, data type

 and

 

device type

 of each data field. After completion to define all data fields, the user should hit [CMD] then 

[ALPHA] keys to end the setup of field specification. This step also determines the number of fields in each 
record and you may continue to set the rest six categories of record specification including 

between field, 

field delimiter, record delimiter, date stamp field, time stamp field and field delay

 

When the FormCaching application is executed, a data file named FORM.DAT will be created to store data. 
The system will not allow the user to redefine FormCaching if the FORM.DAT is existed. It is necessary to 
delete the FORM.DAT in order to change the configuration of FormCaching. 

 
 

4.3 How to Run FormCaching 

 
When FormCaching is enabled, the built-in application can be run by selecting “2.TER” command in User 
mode and then select “2.FORMCACHING”. The FormCaching application will follow the setting as defined 
to display prompting, get input and store data in the file named FORM.DAT. Hit [CMD] then [ALPHA] keys 
to end FormCaching and return to system Ready mode. User may use [

Å

] key to browse a previous data 

record, [

Æ

] key to step to next record, press [C] key to clear the record and then input new value of every 

field of this record. 
After collecting data, the FORM.DAT file can be uploaded to host either by invoking Kermit server in User 
mode described in section 3.2 or remote ESC command described in 3.4. 

 
4.4 Default Setting of FormCaching 

In default, the FormCaching is initialized with settings as shown in the table below. 

 
 

FORMCACHING 
1:YES 
2:NO 
OTHER:EXIT 

DATA FIELD SPECIFICATION: field number=2

 

Category Setting 

Field #1    FIELD PROMPT 

ITEM: 

                 DATA LENGTH 

32 

                 DATA TYPE 

ALPHANUM 

                 DEVICE TYPE 

BOTH 

Field #2    FIELD PROMPT 

QTY: 

                 DATA LENGTH 

                 DATA TYPE 

NUMERIC 

                 DEVICE TYPE 

KEY ONLY 

DATA RECORD SPECIFICATION

 

Category Setting 

BETWEEN FIELD 

Append screen 

FIELD DELIMITER 

RECORD FELIMITER 

CR 

DATE STAMP FIELD 

NONE 

TIME STAMP FIELD 

NONE 

FIELD DELAY 

Содержание PT630D





















Отзывы: