Unitech PS705, Инструкция по установке и эксплуатации

Страница: 17 / 34

PS705
11
Changing the interface cables
By default, a USB cable is already attached to PS705 upon receiving it. To
change the interface connection, follow the steps below:
1. Hold the PS705 upside down.
2. Remove the attached cable.
3. Connect the desired interface cable to PS705.
4. Align the cable through the cable hook.
5. Connect the other end of the interface cable to your host system.
6. If necessary, mount the scanner on the wall using the wall hooks.
2.3 ADJUSTING
PS705’s angle can be adjusted. To do this, hold PS705 by its back and adjust
the angle as shown below.
Front angle: 22° (max) / Back angle: 80° (max)
Wall hooks