Bluetooth Setup
Select
Bluetooth Module
Power ON
. CLick OK.
2.
Under
Program Files
click
Bluetooth
.
Select
BTPowerOn.
1.
Note: For ActiveSync via Bluetooth, please refer to the
PA970 User’s Manual for detailed instructions.
6
1
WLAN Setup
Under
Program Files
select
Communication
. Click
RFPowerOn.
1.
Select
RF Wireless Card
Power ON
and click OK
.
2.
Under Wireless Information
select AP, then set the
wireless properties
.
Then click OK.
3.
5
1
GPRS, WLAN, and Bluetooth
GPRS Setup
GPRS Connected
3.
Under
Program Files
select
GPRS
. Click
DialUpGPRS.
1.
Select GPRS @ 115200.
Click “OK”.
2.
Note:
Please install the SIM card before powering on
GPRS. (Remove the battery cover and battery pack to
access the SIM compartment.
4
1
Power Status
It is necessary to charge the PA970 when “Low” or “Very
Low” are displayed. If “Low” or “Very Low” are still displayed
after charging, please contact Unitech Technical Support.
Four different icons are displayed on the PA970’s status bar
(bottom of the screen) to indicate on-board power status:
When no icon is displayed there is no external
power supply to the PA970, but its battery power is
good.
The “Battery Low” icon indicates that the battery is
low and needs charging.
The plug icon indicates that the PA970 is charging
from an external source: either the 12VDC Power
Adapter or the Charging Cradle.
The “Battery Very Low” icon indicates that the
PA970’s operation should be stopped and the
batteries charged immediately.
The “Backup Battery Low” icon indicates that the
backup battery is low and needs charging.
The “Backup Battery Very Low” icon indicates that
the PA970’s operation should be stopped and the
backup batteries charged immediately.
Check Battery Status
On the Main Screen click
Power
.
Under the
Battery
tab you will see
the status of the main and backup
batteries with three types of
indicators - “Good”, “Low”, and
“Very Low”,
with bold text indicating the actual status.
3
1
Thank you for choosing Unitech’s PA970. Your PA970 is a
rugged and compact mobile computer for data collection via
keypad built-in bar code scanner, capable of wireless
communication via built-in Bluetooth, 802.11b, and GPRS.
This Quick Reference Guide will briefly guide you through
the PA970’s main functions and features.
Introduction
1
Unitech PA970 and Accessories
Please make sure the following items are present:
Check the unit for shipping damage. If anything is
missing or damaged, notify your Unitech Sales
Representative.
•
Unpack the box and save the packaging in the event the
unit needs to be stored or returned to Unitech for service.
•
Communication Cable
Power Cord
AC Power Adapter
QuickStart
Battery
Stylus
CD
PA970
2
Tour of the Unitech PA970
Stylus
Laser Scanner
Scanner Trigger
RS232/USB/
Charging Port
Hand Strap
Reset Hole
IrDA Port
Battery Compartment
Touch Screen
Keypad
SD Compartment
SIM Compartment
(under Battery Compartment)
3
Installing the Battery
CAUTION - Please turn off the terminal
before removing the main battery.
Improper installation of the
rechargeable battery pack can cause
the metal clips in the battery
compartment to bend and/or break.
Carefully read and follow the battery
pack installation procedure below.
1. Remove the battery compartment
door (located on the lower back side
of the unit) by rotating the
compartment latches outward.
2. Position the battery with the battery
connectors towards the right side of
the compartment, facing downwards.
Insert and fully seat the battery pack,
making sure the shape of the battery
pack fits the shape of the battery
compartment.
4
Close the battery compartment door.
Push the latches down and flip them
inward.
3.
