8
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
A backup battery cell is embedded into your device to prevent data loss when
the removable battery pack is removed or completely discharged. This backup
battery will keep the data and system setting for up to 8 hour if the main battery
is removed.
NOTE:
To enable the internal battery cell to provide backup power supply,
charge your device with the main battery pack for at least 16 hours.
NOTE:
To power on the device properly, make sure replacing the battery
compartment cover after installing the battery.
1. Open the battery compartment
cover by sliding the tabs on both
sides in the direction of the arrows
shown and lift the cover up.
2. Turn ON the Backup Battery
Switch.
3. Position the battery pack, making
sure the battery contacts are
aligned with the contacts in the
compartment and the battery is
placed on top of the plastic tab.
4. Slide the battery pack while
simultaneously pulling the plastic
tab until the battery clicks into
place.
5. Replace the battery compartment
cover, push down the tabs and
slide them back into place as
shown.
NOTE:
Make sure the battery compartment cover is securely closed, or you
may be unable to turn ON the terminal.
