10
Unitech PA960
If a PCMCIA card is inserted into the PA960 without
previously attaching a Pulling Tag, the card can be
removed by affixing a length of adhesive tape to the
surface of the card and pulling the card out by pulling
outward on the piece of tape.
PCMCIA Pulling Tags
Pulling Tags simplify the removal of PCMCIA cards from the
PA960. Before inserting a PCMCIA card, remove one of the
three Pulling Tags from the Pulling Tag sheet and adhere it to
both sides of the PCMCIA card, leaving a short (approx. ½ ”) tab.
To remove the PCMCIA card, simply pull outward on this tab.
Using the Stylus
CAUTION:
Never use anything other than the PA960’s stylus on the
screen. Us ing another object as a stylus could caus e permanent
damage.
To write data into a field on a form, use the stylus to print the letters
or numbers. Use very light pressure.
3.
To m ake a c hoice from a menu, lightly tap the tip of the stylus on
that choice.
2.
Hold the stylus as you would a pencil.
1.
Front side of PCMCIA card
Insert CF card to PA960
Find the CF drawer from PA960 package, insert CF card to the
CF drawer. Then insert the CF drawer to the PA960 and place
the CF slot door. Re-install the battery door to PA960 with screw
driver of PA960 stylus.
1.
3
2.
Your CF card.
CF drawer
